Before you install windows first set the BIOS (Basic Input Output System) as for the way the BIOS settings such that I have made below with pictures so that you can understand it and for all its shortcomings before I apologize if it is not the way you expect. Please follow the steps following BIOS settings:
STEP 1
Press the power button on the PC and monitor to turn on your computer. PC will soon do the booting process
STEP 2
Immediately press the [Delete] on your keyboard to go to the BIOS / CMOS Setup
STEP 3
You'll enter the BIOS. The first thing you should do is setting the time that will be used by the computer system. Arrange through the [Main], [System Time]. To change it, use the [+], [-] and the [Tab] key on your keyboard
STEP 4
Furthermore, in the same way, change the date on your computer system through the [System Date].
STEP 5
After setting the time and date of the system, if you want you can also install
BIOS password so that others can not change the BIOS settings that you create. The trick, select the [Supervisor Password], then press the [+] on the keyboard. Next, enter your password on the Enter Password box, then click [Enter]. Enter your password again in the Confirm Password box, then re-click [Enter]. Current status of the option SupervisorPass word has become Enabled.
STEP 6
If your PC will be used rollicking, you also can set a user password for each user. Just take advantage of the [User Password]. The way regulation is tantamount to setting the supervisor password.
STEP 7
Now open the [Advanced] menu by pressing the [‡] (the direction of the arrow to the right) on your keyboard, then select [I / O Device Configuration] then [Enter]
STEP 8
Here you can regulate the use of onboard features on your motherboard. For example, if you use a sound card and modem are not on-board, change the option [On-board AC97 Audio Controller] and [On-board AC97 Modem Controller] to [Disabled] by pressing the [+] on your keyboard. Then click the [Esc] to return to the [Advanced]
STEP 9
Now select the option [PCI Configuration] and press [Enter]. Then order your USB slot functioning set of options [USB Function] to [Enabled]. If not, you can change it by pressing the [+]. If you have, go back to the [Advanced] menu by pressing the [Esc]
STEP 10
Then open the [Boot].
to facilitate the installation of the operating system that will be done after this, change the boot settings from the PC. Then set CDROM as first boot device, or if you want to do the installation from the Flash Disk instead of CD-ROM with the name of the flash disk.
Then the Hard Disk as the Boot Device Floppy 2nd and 3rd Boot Device (Disable if you do not select it), using the [+] or [-]. The point, that whenever booting, a computer search of the operating system on CD-ROM first and then the hard disk, and floppy.
STEP 11
Insert the Windows XP installation CD into the CD-ROM drive. After that, select the [Exit], [Exit Saving Changes] to exit the BIOS and save settings that you created earlier. Furthermore, the computer will restart. And if you did enable the user password, the password box will appear. Fill in the password so that computers can continue booting process. Completed
Attention!
After you set the BIOS settings and to perform the installation of windows 7/Vista way you can see the tutorial here and for how to install windows XP please read here
STEP 1
Press the power button on the PC and monitor to turn on your computer. PC will soon do the booting process
STEP 2
Immediately press the [Delete] on your keyboard to go to the BIOS / CMOS Setup
STEP 3
You'll enter the BIOS. The first thing you should do is setting the time that will be used by the computer system. Arrange through the [Main], [System Time]. To change it, use the [+], [-] and the [Tab] key on your keyboard
STEP 4
Furthermore, in the same way, change the date on your computer system through the [System Date].
STEP 5
After setting the time and date of the system, if you want you can also install
BIOS password so that others can not change the BIOS settings that you create. The trick, select the [Supervisor Password], then press the [+] on the keyboard. Next, enter your password on the Enter Password box, then click [Enter]. Enter your password again in the Confirm Password box, then re-click [Enter]. Current status of the option SupervisorPass word has become Enabled.
STEP 6
If your PC will be used rollicking, you also can set a user password for each user. Just take advantage of the [User Password]. The way regulation is tantamount to setting the supervisor password.
STEP 7
Now open the [Advanced] menu by pressing the [‡] (the direction of the arrow to the right) on your keyboard, then select [I / O Device Configuration] then [Enter]
STEP 8
Here you can regulate the use of onboard features on your motherboard. For example, if you use a sound card and modem are not on-board, change the option [On-board AC97 Audio Controller] and [On-board AC97 Modem Controller] to [Disabled] by pressing the [+] on your keyboard. Then click the [Esc] to return to the [Advanced]
STEP 9
Now select the option [PCI Configuration] and press [Enter]. Then order your USB slot functioning set of options [USB Function] to [Enabled]. If not, you can change it by pressing the [+]. If you have, go back to the [Advanced] menu by pressing the [Esc]
STEP 10
Then open the [Boot].
to facilitate the installation of the operating system that will be done after this, change the boot settings from the PC. Then set CDROM as first boot device, or if you want to do the installation from the Flash Disk instead of CD-ROM with the name of the flash disk.
Then the Hard Disk as the Boot Device Floppy 2nd and 3rd Boot Device (Disable if you do not select it), using the [+] or [-]. The point, that whenever booting, a computer search of the operating system on CD-ROM first and then the hard disk, and floppy.
STEP 11
Insert the Windows XP installation CD into the CD-ROM drive. After that, select the [Exit], [Exit Saving Changes] to exit the BIOS and save settings that you created earlier. Furthermore, the computer will restart. And if you did enable the user password, the password box will appear. Fill in the password so that computers can continue booting process. Completed
Attention!
After you set the BIOS settings and to perform the installation of windows 7/Vista way you can see the tutorial here and for how to install windows XP please read here
0 komentar:
Posting Komentar